2.1.29.4 of 21.02.2022

Added support for the device ITM-20C alarm loop;
Various bugs fixed.
 
2.1.29.0 of 16.08.2021

Added support for the ITM-20C device;
Various bugs fixed.
 

2.1.28 of 20.06.2019

Channels level diagramm is added to tab "Measurements": every bar display channel level, that is measuremented last time
Possibility select continuous measurement period is added
WEB interface bug is fixed: error detail information window was displayed incrrect
 

2.1.27 от 19.12.2017

Measurement timestamp bug fixed: time/date displayed incorrect for some timezones
 

2.1.26 of 13.12.2017

Command line parameters format for *.bat and *.cmd files changed: non-printable symbols replaced with printable ones(0xa -> "\n", 0xd -> "\r", 0x9 -> "\t")
ITM-18. Command line message bug fixed: in case MER check is disabled, BER fault message is incorrect
other non-critical bugs fixed
 

2.1.25 of 22.03.2017

Manufacturer server URL has changed to www.planarchel.ru (for automatic software updating functionality)
Measurement results history view operating mode minor bugs fixed
ViewIt, ViewIt08C and ItToolsT2 channel plan importing bug fixed: importing may lead to creating new measurement period on reading channel plan from device.
ATTENTION! It is strongly recommended to update the Software. Otherwise automatic software updating functionality will become inaccessible after a time.



2.1.24 of 10.01.2017

ITM-18. Measurement results checking against limit plan bug fixed: MER and BER measurement results are checked incorrect
 

2.1.23 of 12.10.2016

Sending alarms via e-mail functionality improved: SSLv2, TLSv1.0, TLSv1.1 and TLSv1.2 encryption protocols are supporting now; port 465 operates with implicitly encrypted connection only, whereas other ports tries to activate encryption with STARTTLS command. In case the command failed non-encrypted connection will be used
 

2.1.22 of 15.09.2016

CIU-002 device log bug fixed: device log was unavailable
Graphical history mode bug fixed: it was impossible to zoom plot by mouse for preBER/postBER trace
 

2.1.21 of 16.09.2015

measuremet results history mode improved: added possibility of viewing measurement result of particular channel of several devices in multi-trace graphical mode
measuremet results history mode improved: multi-trace graphs drawing speed optimized
other non-critical bugs fixed
 

2.1.20 of 07.08.2015

added the group control commands: start/stop measurements, change measurement interval, synchronize time, saving channel plan and saving channel templates
fixed the ITM-18 delete bug: the device channel plan, channel templates, measurements and log was not deleted
non critical bugs fixed
 

2.1.19 of 01.07.2015

CIU-002/003 channel plan: automatic noise frequency detecting option added
CIU-002/003 limit plan: "Min permissible carrier to noise ratio" parameter extended to 48 dB
ITM-18 channel plan: channel plan *.fpf files importing from ViewIT08C software implemented
Other non-critical bugs fixed
 

2.1.18 of 23.03.2015

added support ITM-18
added the ability to save the technical report about error. Only for devices that support saving the technical report
drawing the graph are improved
 

2.1.17 of 25.11.2014

fixed sound check bug: errors of sound not registered


2.1.16 of 21.11.2014

Added support SSL on send e-mail
Fixed the disconnect devices bug: application could crash, if often quick connect and disconnect devices
Changed the installation procedure

2.1.14 from 30.10.2014

DB fragmentation functionality added (see help)
WEB interface functionality improved: hardware errors detailed information added to device log page
 

2.1.13 of 03.09.2014
 

Added saving/loading devices list from file
Fixed hardware errors indication: logs tab caption not highlighted
Changed DB structure (only for data bases created in ViewRSA 2.1.13 and up). New structure compatible with previous versions ViewRSA and DB. Optimized work with history and errors
Fixed error disabling auto update ViewRSA: disable auto update was imposible
 

2.1.12 from 09.12.2013

Setting "Ask for confirmation of closing" added. If the box is checked, the program will request the user to confirm the exit at any attempt of closing the application. In case some other applications (e.g. in regular reboots of the server that runs ViewRSA) close the program, uncheck the box
 

2.1.11 from 22.05.2013

Fixed bug editing channels in demo mode. In the English version of the demo mode in some situations, when you try to edit/add channels displayed an error message
 

2.1.10 from 23.04.2013

Optimized work with plenty devices: increased speed of work
The maximum number of devices increased to 200
 

2.1.9 from 13.02.2013

Network interfaces detecting method changed: ViewRSA hangs-up during initialization on some PC
CIU-003 hardware modification 2.14.2 support added: analog channel audio broadcasting (mono) monitoring implemented
Channel plan manager graphical user interface improved: channels with individual limit plan and measurement schedule are marked with the icon in the channels table
 

2.1.8 from 08.11.2012

change GUI translation systems.


2.1.7 from 23.10.2012

change GUI translation systems

2.1.6 from 22.10.2012

fixed bug on demo mode


2.1.5 from 12.10.2012

added demo mode.

2.1.4 from 07.08.2012

fixed bugs on warning system

2.1.3 from 15.07.2012

first english release